What are the Slack Archives?
It’s a history of our time together in the Slack Community! There’s a ton of knowledge in here, so feel free to search through the archives for a possible answer to your question.
Because this space is not active, you won’t be able to create a new post or comment here. If you have a question or want to start a discussion about something, head over to our categories and pick one to post in! You can always refer back to a post from Slack Archives if needed; just copy the link to use it as a reference..
Docker
Discussion List
-
*composer update spryker/acl -- It will work ?*
composer update spryker/acl -- It will work ?
-
How will update spryker packages within docker
How will update spryker packages within docker
-
Hello everyone 🤝,
Is there an ETA for when PostgreSQL Version 13 and 14 will be compatibl
Hello everyone 🤝, Is there an ETA for when PostgreSQL Version 13 and 14 will be compatible? Version 13 is now out on 2020-09-24 and 14 in late September 2021.
-
Hello all,
After reseting my B2C installation on Docker on a Mac M1, the files are no longer syncin
Hello all, After reseting my B2C installation on Docker on a Mac M1, the files are no longer syncing with containers. I tried docker/sdk sync and it is still not working. Is this a known issue? Can someone please advise?
-
Good morning, did anyone managed to run functional tests on the docker/sdk stack ? Can maybe someone
Good morning, did anyone managed to run functional tests on the docker/sdk stack ? Can maybe someone share a codeception.functional.yml configuration file?
-
Also how do you start listening to console command debugging? I get the xdebug to connect but the br
Also how do you start listening to console command debugging? I get the xdebug to connect but the breakpoints are not hit
-
Hi guys
I am getting the below error while running spryker on local using docker.
2022/10/17 10:15:
Hi guys I am getting the below error while running spryker on local using docker. 2022/10/17 10:15:53 [emerg] 1#1: pcre2_compile() failed: quantifier does not follow a repeatable item in "^$" at "$" in /etc/nginx/conf.d/debug.default.conf:247 nginx: [emerg] pcre2_compile() failed: quantifier does not follow a repeatable…
-
Hi guys
I am getting the below error while running spryker on local using docker.
2022/10/17 10:15:
Hi guys I am getting the below error while running spryker on local using docker. 2022/10/17 10:15:53 [emerg] 1#1: pcre2_compile() failed: quantifier does not follow a repeatable item in "^$" at "$" in /etc/nginx/conf.d/debug.default.conf:247 nginx: [emerg] pcre2_compile() failed: quantifier does not follow a repeatable…
-
Hello, during the deployment process we stumbled upon this issue Running generator
PHP Fatal error:
Hello, during the deployment process we stumbled upon this issue Running generator PHP Fatal error: Uncaught Twig\Error\LoaderError: Template “service/elastic/7.10/elastic.yml.twig” is not defined in “docker-compose.yml.twig” at line 146. in /data/vendor/twig/twig/src/Loader/ChainLoader.php:98 does anyone know what am the…
-
Hello, I have a MacBook pro with M1 pro. I've cloned the newest docker/sdk and done these steps
Hello, I have a MacBook pro with M1 pro. I've cloned the newest docker/sdk and done these steps https://docs.spryker.com/docs/scos/dev/technical-enhancement-integration-guides/switch-to-arm-architecture-m1-chip.html#update-sass, ran docker/sdk bootstrap deploy.dev.yml and when I run docker/sdk up I still get an error, any…
-
How do I forward local environment variables into the images?
How do I forward local environment variables into the images?
-
I'd like to have multiple B2C shops I can use to experiment. Is there a way to separate the volumes
I'd like to have multiple B2C shops I can use to experiment. Is there a way to separate the volumes so I don't over-write the data?
-
is mutagen 0.13beta is still strictly required for mac M1?
i'm having an issue described here:
is mutagen 0.13beta is still strictly required for mac M1? i'm having an issue described here: https://github.com/mutagen-io/mutagen/issues/303
-
Has anyone used `act` successfully to run the github actions flow locally? I get the following error
Has anyone used act successfully to run the github actions flow locally? I get the following error $ act -j php-74-postgres-functional-debian.....[CI/PHP 7.4 / PostgreSQL / Functional / Debian] 🐳 docker exec cmd=[bash --noprofile --norc -e -o pipefail /var/run/act/workflow/3] user= workdir=| Cloning into './docker'...|…
-
Every now an then my local environment breaks, any ideas what I'm doing wrong to get the following e
Every now an then my local environment breaks, any ideas what I'm doing wrong to get the following error: $ docker/sdk console -x data:import -c load_category.yaml --> DEVELOPMENT MODE DEBUGGING MODE Store: FI | Environment: docker.devParseError - Exception: syntax error, unexpected '===' (T_IS_IDENTICAL) in…
-
Hi All,
Did anyone resolve a problem with xdebug on WSL2 as follows?
`Could not connect to debugging
Hi All, Did anyone resolve a problem with xdebug on WSL2 as follows? Could not connect to debugging client. Tried: host.docker.internal:9003 (through xdebug.client_host/xdebug.client_port) Thanks!
-
Hello, i have trouble understanding how to actually deploy the code. i mean yes i can shutdown and r
Hello, i have trouble understanding how to actually deploy the code. i mean yes i can shutdown and run sdk boot and sdk up but that does not really make sense, i need a seamless process without downtime
-
Hi im trying to run the dockerized test system, following the instructions with dev deployment profi
Hi im trying to run the dockerized test system, following the instructions with dev deployment profile it immediately fails: docker/sdk cli -t--> DEVELOPMENT MODE TESTING MODE ┌────╮ ┌─┐ ╭───┬─┐ ┌─┐│ ╮ │───┬───┤ ├─┬───┬─┬─┐ │ ┌─┤ │ │ ││ ╯ │ ┼ │ ├─┤───┤ ┼─┤ ┌─╯ │ └─┤ └─┤ │└────┴───┴───┴─┴─┴───┴─┘ └───┴───┴─┘╭─/data | Store:…
-
Hey guys, is anyone aware of a public fork of the Docker/ SDK to replace Yves with a JS SPA ? or has
Hey guys, is anyone aware of a public fork of the Docker/ SDK to replace Yves with a JS SPA ? or has anyone done it privately that could offer some advice ?
-
I am trying to start my containers using docker/sdk start command but broker is failing with followi
I am trying to start my containers using docker/sdk start command but broker is failing with following message: Could not wait for spryker_b2b_dev_broker_1 anymore. Container status: "unhealthy" Due to this error, RabbitMq is not working. Can anyone please guide?
-
Hey people …
Has anyone faced an issue with Docker being so slow when Host connects to VPN ?
any t
Hey people … Has anyone faced an issue with Docker being so slow when Host connects to VPN ? any tips hints comments would be great 🙏
-
Hi All,
Good day!
I've installed the shop in my local system. When I am trying to place an order w
Hi All, Good day! I've installed the shop in my local system. When I am trying to place an order with redirection mode(it will be redirected from the shop to the concerned banking site), I am facing the ERR_SSL_PROTOCOL_ERROR. Please refer to the below image. This issue occurs when I return from the banking site to my shop.
-
@here Hello, guys. Maybe someone can help me
I’m working on Macbook 2020 (with M1)
Found that spryk
@here Hello, guys. Maybe someone can help me I’m working on Macbook 2020 (with M1) Found that spryker application is working slow for me . For instance ‘Product’s edit page’ in Zed Admin panel is loading for more then 15 seconds. I think that it can be Docker performance issue for Mac. Also other guys in my team with…
-
Hi,
we got a problem installing the demo env on ubuntu.
We already installed docker twice and did al
Hi, we got a problem installing the demo env on ubuntu. We already installed docker twice and did all the prerequistes mentioned here: https://docs.spryker.com/docs/scos/dev/setup/installing-spryker-with-docker/docker-in[…]-prerequisites/installing-docker-prerequisites-on-linux.html Nevertheless we get an error at…
-
Hello everyone! I'm running into an issue when running `docker/sdk up`
Hello everyone! I'm running into an issue when running docker/sdk up
-
Hello, `docker/sdk up` is hanging at the step in the enclosed image (full command is `=> [applica
Hello, docker/sdk up is hanging at the step in the enclosed image (full command is => [application-debug 2/8] RUN --mount=type=cache,id=aptlib,sharing=locked,target=/var/lib/apt --mount=type=cache,id=aptcache,sharing=locked,target=/var/cache/apt bash -c 'if [ ! -z "$(which apt)" ]; then apt update -y && apt install -y…
-
Hello all,
I have installed Spryker B2C Demo Marketplace in docker. Install completed and working fi
Hello all, I have installed Spryker B2C Demo Marketplace in docker. Install completed and working fine, but I need to change the shop domain name. Example: http://backoffice.de.spryker.local To http://backend.testing.che http://yves.de.spryker.local to http://spryker.testing.che Can you please help me with the above one?…
-
Hi! I'm trying to get the merchant demo running from docker but the startup fails. Any help would be
Hi! I'm trying to get the merchant demo running from docker but the startup fails. Any help would be great! Command yves-build-frontend [vendor/bin/console frontend:yves:build] (In progress...)Store: DE | Environment: docker.devInstall Merchant Portal dependenciesOutput trimmed, only last 100 lines shown.Store: DE |…
-
Hello, after a placement order the stock quantity is not reduced. Is there any logic when the quanti
Hello, after a placement order the stock quantity is not reduced. Is there any logic when the quantity is reducing? Is there any OMS step, that doing exactly this...? I am not meaning the "reserve" state
-
Does anybody already use mutagen 0.15.0 for docker/macos development? For me it is very unreliable i
Does anybody already use mutagen 0.15.0 for docker/macos development? For me it is very unreliable in comparison to 0.14. Files/directories are often not synced at all. Problem: I wasn't able to downgrade so far 🙈 Any tipps? ➜ ~ mutagen-compose versionMutagen version 0.15.0Compose version v2.6.0Docker version v20.10.12
Categories
- All Categories
- 38 Getting Started & Guidelines
- 7 Getting Started in the Community
- 8 Additional Resources
- 7 Community Ideas and Feedback
- 33 Spryker News
- 549 Developer Corner
- 420 Spryker Development
- 54 Spryker Dev Environment
- 284 Spryker Releases
- 30 Propel ORM
- 46 Community Projects
- 6 Gacela Project
- 3 PHP Bridge
- 21 Hackathon
- 3.2K 📜 Slack Archives
- 115 Academy
- 5 Business Users
- 370 Docker
- 551 Slack General
- 2K Help
- 75 Knowledge Sharing
- 6 Random
- 4 Code Testing
- 23 Product & Business Questions
- 44 Spryker Safari Questions
- 36 The Blackhole
Popular Tags
- PropelORM 41
- Community 29
- blackhole 18
- CTOTW 16
- Docker 16
- B2C 14
- Academy 13
- Spryker Digital User Group 12
- Spryker Cloud Commerce OS (SCCOS) 11
- EXCITE 2023 10
- Community Tip 9
- Community News 9
- Zed 9
- Hackweekender 2023 9
- Event 6
- B2B 6
- Gacela 6
- Docker SDK 6
- Glue API 5
- Yves 5
- Community Tip 5
- course 4
- Spryker News 4
- Hackathon 4
- DevX 4
Upcoming Events
-
EOY 23 - CommerceQuest Social Gathering
Greetings fellow CommerceNauts 👋🏻 We want to close the year with an informal community gathering. 💞 Join us for a relaxed & social gathering on the 12th of December. Enjoy some beats while chit-chatting and playing a few social games with other members. 😁🎲 A bit of everything: ice breakers and conversations 💬 tier list…
-
Spryker Digital User Group - January 2024 Edition (remote, English)
Greetings, Spryker Herd! Our monthly meetings are for everyone interested in Spryker development and surrounding topics. Each month we invite Sprykees or community member guest speakers to guide us in interactive sessions. Topics vary and range from business to technical, so be sure to check the event agenda below for more…